Bockenem, DE
In addition to the advertised positions, we welcome unsolicited applications.
Occupational safety specialist (m/f/d)
Bockenem
For our headquarters in Bockenem we are looking for a technically skilled, precise working personality.
What to do: - Developing safety concepts and ensuring compliance with occupational health and safety laws, regulations and rules - Implementation of safety measures, partly in cooperation with authorities, company physician and the employers' liability insurance association - Preparation of the legally required risk assessment including documentation and initiation of measures to avoid hazards - Collaboration in maintaining the occupational health and safety management system and conducting corresponding audits - Participation in the implementation and updating of fire protection concepts for all aspects of operational fire protection
What you bring: - Qualification as a specialist for occupational safety according to ASiG as well as experience in a comparable position, preferably in a manufacturing company or in the automotive sector. - Knowledge of the relevant IATF 16949 standard would be an advantage - Good knowledge of relevant laws, regulations and guidelines - Good German and English (spoken/written)
Romania
In addition to the advertised positions, we welcome unsolicited applications.
Quality Engineer
Arad, with immediate effect
Responsible for coordinating cross-functional project teams ( engineering, manufacturing. supply chain, quality) to meet project objectives and customer deliverables in relation to quality, profitability, cost, timing, and resource planning. Coordinate activities for production of pre-serial, test, 0 series, process prepare for serial; Continuous improvement and cost reduction activities in the launch phase; Implementation and control of product changes in the launch phase. Reviewing, updating and improving the production process / launch new products; Tracking of all product launch activities, project release preparation; Prepare and implement documentation and work instructions for each process; Manage and coordinate inter-disciplinary teams; Provides support to production and quality departments in solving problems; Support a smooth product launch in production
University degree (Technical)
Minimum 3 years’ experience in a manufacturing company, in the automotive industry
Good knowledge level of quality tools (APQP&CP, FMEA, PPAP, MSA, SPC)
Good knowledge level of problem-solving methods (8D, Ishikawa, 5WHY, Pareto etc)
Experience in receiving audits
Quality management system knowledge it’s a plus (ISO 9001; IATF 16949)
MS Office good knowledge
SAP knowledge it’s a plus
Willing to travel abroad
Ability to find solutions, speed of reaction in decision-making
Organizational capacity, ability to set priorities, problem-solving abilities
Launch / Industrialization Project Lead
Arad, with immediate effect
Responsible for coordinating cross-functional project teams ( engineering, manufacturing. supply chain, quality) to meet project objectives and customer deliverables in relation to quality, profitability, cost, timing, and resource planning. Coordinate activities for production of pre-serial, test, 0 series, process prepare for serial; Continuous improvement and cost reduction activities in the launch phase; Implementation and control of product changes in the launch phase. Reviewing, updating and improving the production process / launch new products; Tracking of all product launch activities, project release preparation; Prepare and implement documentation and work instructions for each process; Manage and coordinate inter-disciplinary teams; Provides support to production and quality departments in solving problems; Support a smooth product launch in production
5+ years of relevant professional experience in the automotive field;
2+ years of project / process exposure in the relevant field;
Launch Management skills;
Technical expertise;
Business Administration Know-How;
Excellent communication skills;
Social competence and ability to work in a team;
Maintenance Engineer
Arad, with immediate effect
TMaintenance and troubleshooting of rubber injection equipment`s, coating solutions with industrial robots application, hydraulic systems, cutting and notching equipment, as well as electrical system controls for equipment`s, electrical motors, drivers and transportation systems. Manufacturing of mechanical, electrical and electronic components, equipment`s commissioning, maintenance repair and planning according TPM, weak points analysis for improving equipment efficiency. Supervise plan and control activity of subordinates mechanical and electrical technicians. Technical support for spare parts acquisition. Contribute to automation solutions for production. Responsible for the continuous improvement of the maintenance process.
Technical university degree;
2+ years of relevant professional experience in the maintenance automotive field;
A high degree of physical and technical understanding, experience in planning and assembly of systems;
Knowledge of specific production equipment, knowledge of Mechanics, Hydraulics, Pneumatics and Automatization;
Knowledge about industrial robots, PLC programming, electric circuits, control circuits.
Ability of analysis, planning and project management;
Proactive and adaptable to a multinational environment;
Social competence and ability to work in a team;
USA
In addition to the advertised positions, we welcome unsolicited applications.
Current Job Postings on Indeed
Injection Molding/ Press Operator
Dover (Ohio), with immediate effect
Main Responsibility:
Lacing compound through strip and into feed throat
Placing rubber profile inserts (attaching parts) into molds and placing plastic and/or metal inserts into mold as specified
Monitor molded spliced sections per established quality expectations
De-flash parts as needed
Ensure product is stored properly on shop containers/carts and properly identified
This position will require the ability to run 1 or 2 injection molds at same time
Production Worker
Dover (Ohio), with immediate effect
Main Responsibilities:
Use hand tools to surface finish, de-gate parts, tab parts, cut, notch and drill, etc.
Clean parts with specified solutions, dremel parts, inspect slip coat surface finish and inspect non-slip coated rubber surface finish
Inspection of all parts for surface finish, slip coat, tape, pull tabs, trimmed surfaces and detailing
Extrusion Assistant
Dover (Ohio), with immediate effect
The Extrusion Operator has the primary responsibility in the day to day product process flow at the extrusion line, in their absence, the Extrusion Assistant will then step-up and perform the day to day product process flow. The primary function is to produce the products within specification while performing the necessary duties to operate and maintain the specified equipment. Ensure proper materials are used and set screw and profile temperatures. Ensure proper water flow to extruders and temperature controllers. Set hot air oven temperatures and microwave profile. Set proper puller and drive speeds appropriated to design profile. Align and utilize proper equipment, brushing machine, cooling trough, etc. Set-up and operate trace ability printer and operate Pixargus and set-up, start, maintain and properly secure in-line coating applications. Set-up and string sup-straight media as required and utilize and prepare proper packaging. Ability to set-up, mix components (paint), maintain spray systems and quality standards with minimal scrap. Ability to change gun components as required and the ability to maintain spray fluid levels and clean the entire system and replace hoses. Maintain, clean and assemble and disassemble dies properly. Responsible for Extrusion line to run with minimal scrap levels and startup and die changes to run smoothly and timely. Assist in screw changes and help and assist the Extrusion Operator and Extrusion Rubber Feeder at all times. Must be able to PE weld, set-up plasma unit and mix and apply flock glue, know all aspects of the flocking machine, including but not limited to set-up, operating, filling and cleaning. Must inspect and pack flocked profile and do on-line flock testing.
Extrusion Operator
Dover (Ohio), with immediate effect
ESSENTIAL FUNCTIONS AND BASIC DUTIES: The primary function is to produce the products within specification while performing the necessary duties to operate and maintain the specified equipment. Ensure proper materials are used and set screw and profile temperatures. Ensure proper water flow to extruders and temperature controllers. Set hot air oven temperatures and microwave profile. Set proper puller and drive speeds appropriated to design profile. Align and utilize proper equipment, brushing machine, cooling trough, etc. Set-up and operate trace ability printer and operate Pixargus and set-up, start, maintain and properly secure in-line coating applications. Set-up and string sup-straight media as required and utilize and prepare proper packaging. Ability to set-up, mix components (paint), maintain spray systems and quality standards with minimal scrap. Ability to change gun components as required and the ability to maintain spray fluid levels and clean the entire system and replace hoses. Maintain, clean and assemble and disassemble dies properly. Responsible for Extrusion line to run with minimal scrap levels and startup and die changes to run smoothly and timely. Assist in screw changes and help and assist the Extrusion Assistant and Extrusion Rubber Feeder at all times. Must be able to PE weld, set-up plasma unit and mix and apply flock glue, know all aspects of the flocking machine, including but not limited to set-up, operating, filling and cleaning. Must inspect and pack flocked profile and do on-line flock testing.
Why Meteor?
Discover for yourself what it's like working with us.
discover more